Marine Deck Wash and Drinking Water Hoses by Flat Out
2 minute video: The boys at Port Macquarie Marine Rescue had some fun making an ad for Flat Out Marine Hoses
A MARINE HOSE SOLUTION THAT SAVES SPACE, SAVES TIME AND IS A JOY TO USE
Excellent for everything from fishing boat washdown to fresh water tank filling on your yacht at a marina, Flat Out's Australian made hoses are world class. With exceptional longevity and performance plus a unique storage design – the Flat Out Multi-Reel – you will turn your gotta-do jobs into wanna-dos!
The working pressure rating of Flat Out hoses is 2100 kPa and minimum burst pressure 5250 kPa. Since mains pressure maximum in Australia is 500 kPa, you can understand why we say these hoses are tough.
Nice and long yet incredibly tiny, the 15m Flat Out Drink Water Hose on our Multi-Reel Narrow, is Flat Out's superstar.
It’s sleek, it’s shiny, it’s sturdy, and it will bring joy to your otherwise tiresome task, long hose setup and packup. Now with no wasted space and easier winding than ever before due to our new Multi-Reel Narrow. ...read more
This is the B.E.S.T. Water Filters brand model 322HB that we buy in for your convenience. Connect it to your flat out hose and then use a short hose (eg P11 or P13) to connect it to your van. We love it, not only because it's Aussie Made but because it is simply better than alternatives. ...read more
If your water inlet on Aussie and American RVs (and boats) looks like the one in the image, it will have a 3/4inch NPT/GHT thread which isn’t exactly the same as all other plumbing fittings in Australia.
This unit has the correct thread for your inlet and is coupled with a spiffy swivel snap on tap adaptor so you can have the ultimate smooth downward angled connection removing potential bump hazards as people walk past your van and relieving pressure on o-rings for the fittings.
3/4inch NPT/GHT parallel male, right angle to 12mm (1/2inch) snap on quick connect male.
Male to male snap-on brass coupler 12mm to connect drink water hoses. This is a standard fitting and will not only fit Flat Out hoses but all usual hose snap fittings in AU. You also can buy them from your local hardware store (and they might be a fraction cheaper), we simply stock them here for your convenience.
Used to join 2 x drink water hoses with snap fittings.
25cm taste free solid hose with brass snap-on connector. This is a spout used to fill your tank when not connected via the pressure inlet.
This is our premium grade tank filler with brass fittings for longevity (not really necessary for pressure rating with this application) and because it's so nice to match the rest of your set.
Connect this product to your Flat Out Drink Water hose to allow easy insertion to your tank with our product P7, onto the other side of an inline filter, or any brand 12mm hose coupler.
This added convenience item is excellent for tank filling with Flat Out hoses and BEST filter.
Run the hose from the tap to your filter, replace the other filter end with this valve part and then connect a tank filling attachment. This allows you to build up pressure in your hose before filling (needed to lay it in a way to make it then flow) and then when you are finished filling you can easily switch off flow before going back to the tap.
The 3/4 BSP end fits directly into the BEST filter in the place of the existing fitting. Use a watermark approved threadsealant (such as this one), don't use threadtape or overtighten as it will void your BEST filter warranty. Save the existing fitting as a spare. The other end meets 12mm (1/2inch) snap fitting standards to fit onto any other hose snap fitting, such as our tank-filling attachment (P17) or one that you make for yourself. Here's a little video we made on how to use it.
3/4 inch male NPT thread to 3/4 inch male BSP brass converter.
Attach to caravans/motor homes with a USA style female water inlet (such as Sureflow inlet). On the BSP end you can attach P4 or P8 or any other 3/4 inch (20mm) part designed for Australian use.
ELEGANT AND PRACTICAL FLAT HOSE SYSTEM
Flat Out hoses are a miniaturised fire hose, which means they are abrasion resistant and ultra flexible. Winding them onto the Multi-Reel when packing up, you also squeeze all the water out, so when you store your hose it will not leave a puddle. The flat hose is lighter and packs away smaller than conventional hoses of the same length. The 19 mm diameter of the hose means that once the water in it is under pressure, it will not kink as you move around to wash your vessel. The outer jacket is polyester with mould inhibitors and the liner is anti-microbial so there is no need to dry it to pack up.
Brass fittings with standard 12 mm (½") snap ends are crimped to your hose so you can use it with standard adaptors such as trigger nozzles and tap connectors from any brand. However, we also supply a dual-size brass tap adaptor with each unit.
MARINE HOSE DRINK WATER SAFETY AS4020 POTABLE
The Australian standard for potable water is AS4020; please don't confuse this with AS2070 which simply means a hose inner has been made from a food-grade plastic. To receive AS4020 certification, the factory must be inspected, and the hoses are laboratory tested for anti-tainting qualities. Flat Out Drink Water hoses are AS4020 certified with the lining made from Polyurethane (PU) – the material used to make medical tubing. That's how safe they are! Our hoses also conform to German BGA DIN39 potability standard and the factory is ISO 9001 accredited.
JOINING AND STACKING
If extra length is required, you can always join Flat Out hoses together using a standard hose joiner such as our accessory product P7. You can also store your extension leads on Flat Out Multi-Reels. You will enjoy tangle-free hoses or leads every time, and increased lifespan for your gear now being stored in an armour-plated container that reduces twists which could damage the gear. An Original Multi-Reel will take up to 30 m of heavy duty 15 A extension lead, and more for lighter leads. Then you can stack and strap your Multi-Reels for even better protection and space minimisation!
- Australian Made with 3-year warranty
- Front to front stacking for compact storage
- Kink Free
- Taste Free
- Hose Rolls Completely Flat
- Abrasion Resistant
- No Need to Dry
- Save Space
- Save Time
Oops, my hose length fell in the drink! That's ok, just rinse it off so it doesn't get crusty in storage. Salt water will not harm your hose.
So much space now!